Floriani Medium Tearaway
Now available in Black or
White!
 Floriani Medium Tearaway
is manufactured using a unique process called the "Delta Wet Laid Non-Woven"
technique. The benefit of using this method of production is that the
product is very solid, when closely examined you will see no thick and/or
thin spots. When used as an embroidery stabilizer, it is not necessary to
use multiple layers in random directions to support stitches. Medium
Tearaway is a 1.5 oz, clean tear stabilizer. It is the best choice for a
supplement stabilizer when working on high stitch count designs in
conjunction with your other stabilizers such as No Show Nylon Mesh, Heat N
Sta® Tearaway or Wet N Stick®. It provides back up support without adding
unwanted bulk.
-
Use to support
embroidery designs on towels, denim or other "stable" woven fabrics
-
Tears clean from
around most embroidery designs
-
Will support about
8,000 stitches on a well-digitized, average size design
-
Use in conjunction
with other stabilizers for added support
Floriani's Medium
Tearaway
Product Identity
Black
FTMB910 9” x 10 yds
FTMB1210 12” x 10 yds
White
FTM1210 12” x 10 yds
FTM1225 12” x 25 yds
To use
Floriani Medium Tearaway:
-
Cut a piece of the
stabilizer at least one inch larger than the hoop size you are planning
to use.
-
Hoop the stabilizer to
the wrong side of the fabric.
-
Place the embroidery
frame on the machine; complete the layout and centering of the design.
-
If the design to be
stitched is denser than 8,000 stitches or if it is a poorly digitized
design (too many stitches for designs size), float an additional layer
of Floriani Medium Tearaway between the hoop and the bed of the machine
for each additional 8,000 stitches for added support!
-
Once the design is
complete, remove the hoop and fabric from the machine. Tear away the
stabilizer from around the design one layer at a time.
Contact us today for additional
information on Floriani products.
|
